Setting Huawei HG612 to Bridge Mode
From default state, to setup:
Port #1 bridge to PTM VDSL VCI 35
Port #2 for management
- Login at http://192.168.1.1/, username admin, password admin.
- Setup VDSL2 Bridge using PTM (suitable for Server North, HSMP & Bell Nexxia networks)
- Basic -> WAN
- Layer 2: PTM
- WAN: Enable
- Service List: INTERNET
- Port Binding: LAN 1 (only)
- Connection Mode: Bridge
- Bridge Type: PPPoE_Bridged
- DHCP transparent transmission: Disable
- WAN dot1q: Enabled, 35
- WAN dot1p: Enabled, 0
- LAN dot1q: Disabled
- LAN dot1p: Disabled
- Submit
- Remove TR069 configuration:
- At top of screen, select other PTM connection (301)
- At top right of screen, click Remove
- Confirm.
- Make Port #2 useful for management:
- Basic -> LAN
- DHCP Server: Enable
- Start IP: 192.168.1.200
- Submit